Entry Level Systems

  1. Graco Reactor 3 E-20

    The Reactor 3 E-20 is a spray foam system built for contractors focused on smaller jobs or for contractors just entering the business.

    • Maximum Output: 20 lb (9.0kg)/min
    • Maximum Pressure: 2000 psi (14 MPa, 140 bar)
    • Max Hose Length: 220 ft (67 m)

    Shop Graco Reactor 3 E-20 Machines & Replacement Parts

  2. Graco Reactor 3 E-XP1

    The Reactor 3 E-XP1 polyurea system is a good choice for contractors focused on smaller jobs or for someone looking for a great starter machine.

    • Maximum Output: 1.5 gal (5.7 L)/min
    • Maximum Pressure: 3000 psi (20.6 MPa, 206 bar)
    • Max Hose Length: 220 ft (67 m)

    Shop Graco Reactor 3 E-XP1 Machines & Replacement Parts

  3. Graco Reactor A-25

    The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite.

    • Maximum Output: 25 lb (11.4 kg)/min
    • Maximum Pressure: 2000 psi (14 MPa, 140 bar)
    • Max Hose Length: 210 ft (64 m)

    Shop Graco Reactor A-25 Machines & Replacement Parts

  4. Graco Reactor A-XP1

    The Reactor A-XP1 systems have the ability to maintain consistent temperature control, even when you’re spraying at maximum flow rates.

    • Maximum Output: 1.5 gal (5.7 L)/min
    • Maximum Pressure: 3500 psi (24 MPa, 240 bar)
    • Max Hose Length: 210 ft (64 m)

    Shop Graco Reactor A-XP1 Machines & Replacement Parts

LEGACY REACTOR EQUIPMENT:
The spray equipment below has been discontinued and replaced by the REACTOR equipment above but we still carry a full selection of replacement parts for these legacy Reactors.

  1. Graco Reactor E-20

    The Reactor E-20 spray machine has been discontinued and replaced by the Reactor 3 E-20 but replacement parts are still available.

    • Maximum Output: 20 lb (9.0kg)/min
    • Maximum Pressure: 2000 psi (14 MPa, 140 bar)
    • Max Hose Length: 210 ft (64 m)

    Shop Graco Reactor E-20 Replacement Parts

  2. Graco Reactor E-XP1

    The Reactor E-XP1 spray machine has been discontinued and replaced by the Reactor 3 E-XP1 but replacement parts are still available.

    • Maximum Output: 1.0 gal (3.8 L)/min
    • Maximum Pressure: 2500 psi (17.2 MPa, 172 bar)
    • Max Hose Length: 210 ft (64 m)

    Shop Graco Reactor E-XP1 Replacement Parts

  3. Graco Reactor A-20

    The Reactor A-20 spray machine has been discontinued and replaced by the Reactor A-25 but replacement parts are still available.

    • Maximum Output: 20 lb (9.0 kg)/min
    • Maximum Pressure: 2000 psi (14 MPa, 140 bar)
    • Max Hose Length: 210 ft (64 m)

    Shop Graco Reactor A-20 Replacement Parts

The entry level Reactor systems have the ability to maintain consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality foam or coatings. Have peace of mind with the proven durability of a Graco Reactor spray machine.