Used Graco T3 CS Transfer Pump Kit
Overview
This T3 transfer pump package was hooked up to our in-house demo machine and has seen very little use, fully flushed and ready to go. 1 package available. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required. The T3 pump is rated for a continuous output of 17 lpm (4.5 gpm), allowing enough flow to easily keep up with Graco’s biggest proportioner, the Reactor H-50. As the T3 is rated for a max. inlet pressure of 6.8 bar (100 psi, 0.68 MPa), an air regulator is included with every pump.
Request a Quote
Contact one of our sales experts toll-free at 1-800-901-0088 or fill out the form below
Key Features
- Easier to maneuver - The overall height of the T3 is 3.7 inches shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig
- More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump
- Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor
- Longer lasting pump - designed for durability with less maintenance
- Quick-release bung adapter for easy drum removal without interference from hose connections
Purchaser understands that the Goods described herein have been used by persons other than Seller. All goods are purchased by the purchaser "as is" and "with all faults", and seller makes no representation or warranty, express, or implied, including but not limited to warranties of merchantability or fitness for a particular purpose or any other matter with respect to the goods. Seller strongly recommends that purchaser conduct an inspection of the goods sold hereunder. seller shall not be responsible for the consequences of purchaser's failure to inspect the goods.
