Cup Brush
The perfect tool for sanding truck beds before applying a spray on bed liner. Sand up to 35 truck beds with one cup brush, saving time, with less effort than hand sanding.
- Buy 6 for $22.95 each and save 15%
- Buy 12 for $20.95 each and save 22%
- Buy 24 for $18.95 each and save 30%
-
Sander Polisher, 7" Makita
$395.51
Sander Polisher, 7" King
$145.78
Air Sander 7" Vertical
$357.29
Details
The perfect tool for sanding truck beds before applying a spray on bed liner. The flexible nylon filaments easily sand every contour of the truck bed. They offer superior performance when compared to steel or aluminum oxide filaments.
These cup brushes are equal to 80 grit sandpaper leaving a ideal profile for the spray on bed liner to bond and adhere to. With less effort than hand sanding, better coverage than a DA/Orbital sander and unbeatable speed the 5" cup brush is unmatched.
Nylon Filaments
The 5” cup brush utilizes nylon filaments that are impregnated with silicon carbide, a chemical compound that forms an extremely hard, iridescent crystal. Silicon carbide has a very fast cutting speed reducing prep time.
Only the “tips” of the brush do the work, consequently only light pressure is required to achieve effective brushing action. Excessive operating pressure will reduce the service life of the brush.
Easy Attachment
Easily attaches to pneumatic or electric sander/polishers with 5/8” – 11 pitch spindles.
Recommended operating speed is between 500 and 1500 RPM. Operating brush at speeds over recommended range increases heat buildup, which may reduce brush effectiveness and the life of the brush.
| Abrasive Grade | 80 Grit |
|---|---|
| Diameter | 5 Inch (13 cm) |
| Maximum RPM | 4,500 (safety rating only) |
| Operating RPM | 500 - 1,500 (recommended range) |
| Spindle Size | 5/8” - 11 UNC |
| Length | 1 1/2 Inch (4 cm) Filiments |
