Graco T3 SS Transfer Pump Kit, W/Plumbing & Air
Overview
Transfer pump package includes two Graco T3 Stainless Steel 3:1 Transfer Pumps, air supply kit, 3 m x 19 mm (10 ft x 3/4 in) supply hose and fittings for two pumps.
Features
- Easier to maneuver - The overall height of the T3 is 3.7 inches shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig
- More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump
- Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor
- Longer lasting pump - designed for durability with less maintenance
- Quick-release bung adapter for easy drum removal without interference from hose connections
-
Graco T3 SS Transfer Pump
$3,250.00
Details
Transfer pump package includes two Graco T3 Stainless Steel 3:1 Transfer Pumps, air supply kit, 3 m x 19 mm (10 ft x 3/4 in) supply hose and fittings for two pumps.
The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required. The T3 pump is rated for a continuous output of 17 lpm (4.5 gpm), allowing enough flow to easily keep up with Graco’s biggest proportioner, the Reactor H-50. As the T3 is rated for a max. inlet pressure of 6.8 bar (100 psi, 0.68 MPa), an air regulator is included with every pump.
Specifications
- Maximum output – continuous: 4.5 gpm (17 lpm)
- Maximum output – intermittent: 6.0 gpm (22 lpm)
- Maximum input air pressure: 100 psi (6.8 bar, 0.68 MPa)
- Maximum output fluid pressure: 315 psi (21.7 bar, 2.17 MPa)
- Maximum fluid temperature: 190°F (88°C)
- Weight: 22 lb (10 kg)
- Height: 50.3 in (128 cm)